Price: ₹2,799 - ₹1,747.00
(as of Mar 20, 2025 06:49:50 UTC – Details)

Description:
Thermistor Silicone Heater Heat Bed: Square silicone heater pad, 100×100 mm, 220V, 100W. Note: Solid state relay (VSSR) is Optional.
DIY Heater Heat bed: Suitable for 3D printers.
Advantages: Fast heating, low power, high temperature, uniform heat transfer, long life service, high thermal efficiency conversion.
Features: With adhesive sticker on back, easy to install and customizable; Silicone pad with quick heating, please ensure a good anti hot measures.
Notes: The limit temperature of the heating pad is about 200 Celsius, it is easy to burn out when the temperature is over 200 Celsius; Can not be used in water.
Specification:
Material: Silicone(with Adhesive sticker)
Voltage: 220V
Power: 100W
Color: Orange
Continuous Working Temperature: Lower than 200 degrees Celsius
Optional:
Silicone Heated Bed Weight: 60g
Silicone Heated Bed + Relay Weight: 145g
Size Chart:
100mmx100mm/3.94inchx3.94inch
Package Includes:
1 Set 3D Printer Silicone Hot Heated Bed Heating Pad
Note:
1. Please allow slightly error due to manual measurement.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
3. Wish you a wonderful on-line shopping!
Thermistor Silicone Heater Heat Bed: Square silicone heater pad, 100×100 mm, 220V, 100W. Note: Solid state relay (VSSR) is Optional.
DIY Heater Heat bed: Suitable for 3D printers.
Advantages: Fast heating, low power, high temperature, uniform heat transfer, long life service, high thermal efficiency conversion.
Features: With adhesive sticker on back, easy to install and customizable; Silicone pad with quick heating, please ensure a good anti hot measures.
Notes: The limit temperature of the heating pad is about 200 Celsius, it is easy to burn out when the temperature is over 200 Celsius; Can not be used in water.

Price: ₹2,399 - ₹1,528.00
(as of Mar 20, 2025 04:48:09 UTC – Details)

Description:
3D Printer Display Module External Display Adapter Module Spare Parts for Voron 2.4 STM32 Mini12864 3D Printer Accessories
This is a dedicated board to drive Mini 12864 Display. Its intended to run for Klipper firmware.
Reduce the number of wires to connect your display for VORON, no ribbon cables are required, you can plug this directly onto the back of your screen and then use a single micro USB cable for Raspberry Pi.
If you receive the module, please make sure to solder the reset button and for BOOT0 jumper. You may not need the SWD interface
In normal operation mode, do not skip the BOOT0 pin. It is only used when putting the board in DFU mode to flash new firmware
Specification:
Material: ABS plastic
Size:13.5 x 42.5mm/0.5 x 1.7 inch
Applicable Model: For Voron 2.4 STM32 Mini12864
Package Includes:
1 Piece Display Module
Note:
1.Please allow 1~3 cm error due to manual measurement, thanks.
2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Please understand, thank you.
3D Printer Display Module External Display Adapter Module Spare Parts for Voron 2.4 STM32 Mini12864 3D Printer Accessories
This is a dedicated board to drive Mini 12864 Display. Its intended to run for Klipper firmware.
Reduce the number of wires to connect your display for VORON, no ribbon cables are required, you can plug this directly onto the back of your screen and then use a single micro USB cable for Raspberry Pi.
If you receive the module, please make sure to solder the reset button and for BOOT0 jumper. You may not need the SWD interface
In normal operation mode, do not skip the BOOT0 pin. It is only used when putting the board in DFU mode to flash new firmware

Price: ₹799 - ₹482.00
(as of Mar 20, 2025 03:47:05 UTC – Details)

Description:
This product is not deformed for long-term use
The high smoothness of the surface of the PC material makes the feeding process smoother, more durable, and more stable in feeding.
Supports automatic loading of feeds without card feed problems.
At the same time for the long-term use of ABS injection material on the market is easy to deformation, so the use of PC material, surface matte treatment.
Applicable models: XYZ, I3, delta (Kossel), Hbot, ultimaker, etc.

Specification:
Material: Plastic
Size: 40*30*12mm
Package Includes:
1xPC Extrusion
1xPC4-M5 quick plug
2x matching screws
1x604UU guide wheel
1x matching spring
This product is not deformed for long-term use
The high smoothness of the surface of the PC material makes the feeding process smoother, more durable, and more stable in feeding.
Supports automatic loading of feeds without card feed problems.
At the same time for the long-term use of ABS injection material on the market is easy to deformation, so the use of PC material, surface matte treatment.
Applicable models: XYZ, I3, delta (Kossel), Hbot, ultimaker, etc.

Price: ₹4,999 - ₹3,134.00
(as of Mar 20, 2025 02:46:00 UTC – Details)

Description:
Offers excellent first layer adhesion for Creality Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3S,Ender 5,CR20, CR20 Pro,CP-01, and other 3D printers
Sizes: 235x235mm
PEI powder coating, higher durability and a higher resistance to temperatures ensure a longer lifespan of bed adhesion.
Thin sheet installs quickly on top of existing flat build platforms.
Easy to adhere on PEI bed and easy to be removed.Simple installation, easy to use.
Size Chart:
Size: 235x235mm/9.25×9.25inch

Package Includes:
1 Piece PEI Powder Coating Steel Plate
Note:
1. Please allow slightly error due to manual measurement.
2. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
3. Wish you a wonderful on-line shopping!
Offers excellent first layer adhesion for Creality Ender 3 V2,Ender 3 Pro,Ender 3,Ender 3S,Ender 5,CR20, CR20 Pro,CP-01, and other 3D printers
Sizes: 235x235mm
PEI powder coating, higher durability and a higher resistance to temperatures ensure a longer lifespan of bed adhesion.
Thin sheet installs quickly on top of existing flat build platforms.
Easy to adhere on PEI bed and easy to be removed.Simple installation, easy to use.

Price: ₹599 - ₹394.00
(as of Mar 20, 2025 01:44:52 UTC – Details)

Description:
High Quality Material : 3D Printer Heater Protect Block is made of high quality silicone material, which is durable and can be used repeatedly, high temperature resistance and long service life.
Function : Heater Protect Block case can help you keep the heating block clean, prolong the life of the heating block and extruder, and effectively keep the temperature of the hot end stable.
Features : Printer Heating Block Silicone Cover Case has good performance, stable, not easy to fall off.
Easy to Install : Silicone Heater Protective Socks is easy to install and remove and can be reused, saving your energy and time.
Size : Printer Heater Cover Protection Case, 29mmx17.5mm.
Specification:
Material: Silicone
Size Chart:
29mmx17.5mm/1.14inchx0.69inch
Package Includes:
1 Printer Heater Block Protective

Note:
Please allow slightly errors due to manual measurement and different monitors.
High Quality Material : 3D Printer Heater Protect Block is made of high quality silicone material, which is durable and can be used repeatedly, high temperature resistance and long service life.
Function : Heater Protect Block case can help you keep the heating block clean, prolong the life of the heating block and extruder, and effectively keep the temperature of the hot end stable.
Features : Printer Heating Block Silicone Cover Case has good performance, stable, not easy to fall off.
Easy to Install : Silicone Heater Protective Socks is easy to install and remove and can be reused, saving your energy and time.
Size : Printer Heater Cover Protection Case, 29mmx17.5mm.

Price: ₹699 - ₹432.00
(as of Mar 20, 2025 00:43:41 UTC – Details)

Description:
Material: PLA(Polylactic Acid)
Color: Red
Universal compatible with most 1.75 mm 3D pens and printers(Dimensional Accuracy +/- 0.05 mm)
A great gift set for your kids and art lover to have fun with crafting and drawing
Length: 20 cm / 1pcs




Package Includes:
40Piece Red ABS Filament 1.75mm
Material: PLA(Polylactic Acid)
Color: Red
Universal compatible with most 1.75 mm 3D pens and printers(Dimensional Accuracy +/- 0.05 mm)
A great gift set for your kids and art lover to have fun with crafting and drawing
Length: 20 cm / 1pcs

Price: ₹1,199 - ₹730.00
(as of Mar 19, 2025 23:42:52 UTC – Details)

Description:
This product is not deformed for long-term use
The high smoothness of the surface of the PC material makes the feeding process smoother, more durable, and more stable in feeding.
Supports automatic loading of feeds without card feed problems.
At the same time for the long-term use of ABS injection material on the market is easy to deformation, so the use of PC material, surface matte treatment.
Applicable models: XYZ, I3, delta (Kossel), Hbot, ultimaker, etc.

Specification:
Material: Plastic
Size: 40*30*12mm
Package Includes:
1xPC Extrusion
1xPC4-M5 quick plug
2x matching screws
1x604UU guide wheel
1x matching spring
This product is not deformed for long-term use
The high smoothness of the surface of the PC material makes the feeding process smoother, more durable, and more stable in feeding.
Supports automatic loading of feeds without card feed problems.
At the same time for the long-term use of ABS injection material on the market is easy to deformation, so the use of PC material, surface matte treatment.
Applicable models: XYZ, I3, delta (Kossel), Hbot, ultimaker, etc.

Price: ₹799 - ₹507.00
(as of Mar 19, 2025 22:41:38 UTC – Details)

Description:
Material: Aluminum Alloy
Matching screws and washers: M3x10 and M3x4
Surface treatment: surface sandblasting scrub electroplating oxidation treatment V6 special heating aluminum block
Applicable scope: 3D printer
Size:approx. 30x12x13mm
Package Includes:
1 Pieces Heater Block
Material: Aluminum Alloy
Matching screws and washers: M3x10 and M3x4
Surface treatment: surface sandblasting scrub electroplating oxidation treatment V6 special heating aluminum block
Applicable scope: 3D printer
Size:approx. 30x12x13mm

Price: ₹899 - ₹552.00
(as of Mar 19, 2025 21:40:36 UTC – Details)

Description:
Heat insulation cotton used for 3D printer nozzle insulation.
Made from heat-resistant ceramic fibers, it helps to maintain the key components of 3D printers.
The heating aluminum block, made the internal temperature is flat, save electricity, energy saving.
This kind of high temperature resistant cotton can be long-term worked under the temperature at 900 degrees.

Specification:
Size: 210x200x3mm
Thickness: 3mm
Color: White
Package Includes:
1 Piecex insulation cotton

Heat insulation cotton used for 3D printer nozzle insulation.
Made from heat-resistant ceramic fibers, it helps to maintain the key components of 3D printers.
The heating aluminum block, made the internal temperature is flat, save electricity, energy saving.
This kind of high temperature resistant cotton can be long-term worked under the temperature at 900 degrees.
Specification:

Price: ₹1,299 - ₹811.00
(as of Mar 19, 2025 20:39:13 UTC – Details)

Description:
Product Type : Diameter 1.75mm ABS 3D Printer Filament, multicolor mixed, professional manufacturing, no warping and no clogging,
High Quality Material : 3D Pen ABS Filament Refills allowing your 3D pen and 3D printer to print smoothly, bringing better printing results.
High Quality Material : 3D Printing Filament is made of ABS material, which has odorless, bubble free, environmentally friendly, durable to use.
Features : 3D Pen Filament Refills are low shrinkage, good stability, no cracks and deformation. ABS performs well even when printing large models
High Compatibility : 3D Printer Filament Refills is universal for most 3D printer models.
Specification:
Material: ABS material
Size Chart:
Diameter 1.75mm
Package Includes:
1 Set 3D Pen Filament Refills (Random Colors)
Note:
Please allow slightly errors due to manual measurement and different monitors.
Product Type : Diameter 1.75mm ABS 3D Printer Filament, multicolor mixed, professional manufacturing, no warping and no clogging,
High Quality Material : 3D Pen ABS Filament Refills allowing your 3D pen and 3D printer to print smoothly, bringing better printing results.
High Quality Material : 3D Printing Filament is made of ABS material, which has odorless, bubble free, environmentally friendly, durable to use.
Features : 3D Pen Filament Refills are low shrinkage, good stability, no cracks and deformation. ABS performs well even when printing large models
High Compatibility : 3D Printer Filament Refills is universal for most 3D printer models.